Dynojet Power Commander quickshifter pressure sensor, push type. Aftermarket Dynojet — not a Ducati OEM part.
Identified from the sensor label as Dynojet QUICKSHIFTER pressure sensor PN 66400005 (label also marked PUSH; d.o.m. marking 11 3). Inline shift-rod pressure sensor for Power Commander quickshifter setups. Green and blue leads into a grey 2-pin connector (Dynojet push wiring).
Universal shift-rod style: mounts in-line with the gear-linkage tie-rod on bikes where an upshift pushes/compresses the rod. Not a Ducati-only kit — confirm your shift-rod length, thread, and push vs pull direction before buying. For Power Commander III USB this style plugs into the expansion port. Power Commander V / later setups typically need a Dynojet Quick Shifter Expansion Module (QEM), Secondary Fuel Module, or Ignition Module, or the green/blue wires land on the PCV shifter inputs — Power Commander module and QEM are NOT included.
Includes (as pictured):
- Dynojet push pressure sensor with red/black label
- Stainless shift rod with spherical rod end
- Grey 2-pin connector on green/blue wires
- Separate spare aluminum rod/tube
Condition: Used. Black outer cable jacket is nicked/split near the middle of the cable loop (see photos); please inspect. Metal shows light shop scuffs from prior install. Sensor and connector intact as pictured. Not tested on a bike.
Ships USPS Priority Mail.
